Specification:

Ink type  :One-pack thermal curing ink blended with acrylic urethane
Usage    : Applicable to glass, aluminum, iron and coated metal.
Feature : Gloss finish with excellent levelness.
                Required thermal curing at high temperature.
                

Diluents:Standard solvent   : T-926,T-945
                Slow dry solvent  : T-927
                Retarder              : T-980

Hardener: N hardener, standard hardener, used in regular circumstance 
                 D hardener, use to improve rub-resistance.

Mixing ratios: Ink: Hardener =100:10
                        Gel phenomena may occur after 6-8 hours of usage at room temperature after mixing,
                        leading to Reduced physical performance.

Wash-up        :T-31/T-15
Screen mesh :200-300 mesh / inch polyester or Nylon screens is recommended.
Drying time    :Air drying: sets to touch in 40minutes at 20℃.
                      Thermal curing: 30minutes at 80℃+1day air-drying.
Notes             :N-hardener is extremely sensitive to moisture， please use as soon as possible after opening.
                       Rate of evaporation has been reduced to improve printability, thermal curing is recommended.
                       During multi-layer printing, it is recommended for previous layers to be set to touch dry, 
                       and hard-dried after all procedures are completed to prevent peeling.